Products
Note: All items are HO scale (1:87.1) unless otherwise specified.
TOS = Temporary Out of Stock
Click the thumbnail for a larger image. Use your browser's BACK button to come back to this page.
Click here to go to our order form.
Prices effective 20th of August 2011 and subject to change without notice.
|
Item
|
Description
|
Price
|
 |
A pair of sleeper loads to suit the NSW K wagon. Pack of two (2). |
$11.00
|
 |
Detailed RUB floor Insert RS Buffet Diner Car For Silvermaz Kits Refer to the article published in the “Australian Model Railway Magazine”, issue 244 , for further detailing of the under floor for the RS Buffet Diner Car. There you will find information for placement of parts supplied in the Silvermaz kit, water tanks, brake cylinder, battery & fuse boxes and more to complete your well detailed model. |
$20.00
|
 |
Detailed RUB floor Insert SBS/SFS Sitting Car For Silvermaz Kits Refer to the article published in the “Australian Model Railway Magazine”, issue 243 , for further detailing of the under floor for the SBS, SFS Sitting car. There you will find information for placement of parts supplied in the Silvermaz kit, water tanks, brake cylinder, battery & fuse boxes and more to complete your well detailed model. |
$20.00
|
 |
1967 NSW ABV "High Arched Roof" Covered Van The kit features detailed urethane castings, brass lost wax castings, decals and much more.
The model comes with a Trainorama® S wagon underframe so no troubles with axle alignment.
|
$44.00
|
 |
1961 NSW 7000 Gallon D.O.T Rail Tank Car
The kit features urethane castings, brass etchings, brass lost wax castings, bogies, decals and much more.
The model comes with extensive detail of brake gear, product charge and discharge, brass etch ladders and mesh walkways and both a soldering & drilling jigs.
|
$58.00
|
 |
Coil Wire loads to suit the NSWGR K Wagon.
Pack of two (2).
|
$14.00
|
 |
Coil Wire Loads to suit the NSWGR S wagon.
Pack of two (2).
|
$13.00
|
 |
Sleeper loads to suit a range of open wagons, BDY/NODY, BDX/NOBX.
If the loads are to be used in either of the ELX/NOCX or the A.N AOBX open wagons it is recommened the load be trimmed down of one sleeper to fit the model.
Pack of two (2).
|
$15.00
|
 |
Ore Loads to suit the new Columbia Models NOFF open Ore Wagon.
Sold as a pack of three (3), each ore load is of a different shape from the other.
|
$16.00
|
 |
1968 Tullochs AMOCO Rail Tank Car The kit features urethane castings, brass etchings, brass lost wax castings, bogies, decals and much more. The model comes with extensive detail of brake gear, product charge and discharge, brass etch ladders and mesh walkways. |
$58.00
|
 |
A pair of sleeper loads to suit the NSW S truck, each one different from the other. Pack of two (2). |
$10.00
|
 |
Brass shunters steps to suit the NSW OCY/NOCY and the BDY/NODY open wagons. Pack of four (4). |
$6.00
|
 |
TANK CAR PARTS. End caps to suit 20mm PVC tube.
(HO scale 5’11” dome end). One (1) pair. |
$3.00
|
 |
Milled timber load cast in urethane. The load has fine detail depicting the grain of the wood and the finished sizes it has been cut to.
The load is around a scale length of 20’6” long which will fit inside a NSWGR K wagon or overhang the S truck as practised by the railway in the past.
(Painted load is for display purpose only)
|
$8.00
|
 |
Coal loads for Trainorama NSWGR K trucks.
Urethane castings are pre-coloured; no need to paint.
Drop in for a neat fit.
Each load has a slightly different shape from each other.
Pack of two (2).
|
$9.00
|
 |
Coal loads for Trainorama NSWR BCH type coal hoppers.
Urethane castings are pre-coloured; no need to paint.
Drop in to sit snugly over the internal ribs.
Each load has a slightly different shape from each other.
Pack of two (2).
|
$9.00
|
 |
Coal loads for Trainorama NSWGR S trucks.
Urethane castings are pre-coloured; no need to paint.
Drop in for a neat fit.
Each load has a slightly different shape from each other.
Pack of two (2).
|
$8.00
|
 |
Dress-up kit for the Trainorama NSWR GHG/NVGA guards vans.
Kit includes urethane/brass castings & brass etchings.
|
$16.00
|
 |
Dress-up kit for the NSWR 2AT bogie.
Suits both the Trainorama 2AT and the AR Kit Co. 2AT bogies.
Kit includes parts for two (2) bogies.
Urethane castings and brass wire.
|
$5.00
|
 |
Brass passenger steps to suit most NSW railways passenger stock.
Pack of four (4).
|
$6.00
|
 |
Etched brass 'spider' brake wheels to suit most NSWR rollingstock.
Available in both 18 inch and 22 inch sizes.
20 wheels per pack (enough to do 10 wagons)
|
$4.00
|
 |
Etched brass builders plates to suit Trainorama NSWR 47 class locomotive.
Plate reads "GONINAN-HITACHI".
Pack of two (2).
|
$3.00
|
 |
Assorted urethane tree stumps.
Suits scales of HO, HOn30, On30, O.
Pack of eleven (11).
|
$8.00
|
| Home | Order Form | Links | Contact Us |
This site and its contents are Copyright © InFront Models 2011.